The Union automobile was a vehicle manufactured by the Union Automobile Company from 1902 until 1905. It was designed by John William Lambert, who had developed the three-wheel Buckeye gasoline buggy in 1891. Over the next decade, Lambert substantially refined the vehicle, with modifications including an additional wheel, a more powerful engine, and a new transmission system. The Union Automobile Company was formed as a subsidiary of Lambert's Buckeye Manufacturing Company solely to manufacture the Union, which took its name from Union City, Indiana, the city where it was built and which endorsed its production. In total, the company built over three hundred Union automobiles, before development shifted to the Lambert automobile, the Union's successor.

Union
John Lambert and brothers
in 1902 'Union' automobile
Overview
ManufacturerUnion Automobile Company
Production300
Model years1902–1905
AssemblyBuckeye Manufacturing
DesignerJohn William Lambert
Dimensions
Wheelbase72 in (1,829 mm)
Width56 in (1,422 mm)
Chronology
PredecessorBuckeye gasoline buggy
SuccessorLambert automobile

Development

edit
 
Lambert Union experimental car

The Union automobile was a modified design of a previous single-cylinder vehicle that John William Lambert had started producing in 1891 in Union City, Ohio.[1] Experimental models were produced in 1898, 1900, and 1901; the 1900 model was the first to feature Lambert's new transmission system.[2] Lambert, who had over six hundred patents for automobile-related parts, secured favorable concessions from the Union City chamber of commerce, in return for the vehicle being named after the city.[1][3] It would be produced there by the Union Automobile Company from 1902 until 1905.[1]

Manufactured from parts made by the Buckeye Manufacturing Company in Anderson, Indiana, the Union had entered full production by 1902, but improvements to the design were made yearly. In 1903, the motor, which consisted of a pair of opposed 6 x 4-inch (100 mm) cylinders, was moved from the front, where it had been initially placed, to the rear.[4] In 1904 and 1905, five-seater tonneau models were produced; while the 1904 model had a 10 horsepower engine, the company produced 12 and 16 horsepower versions the following year.[5]

Manufacturing of the automobile was moved from Union City to Anderson in 1905. Late that year, the car was redesigned, and production was started again under a new name: the Lambert automobile, while production of the union stopped entirely. In total, the company had manufactured 325 vehicles between 1902 and 1905 (25 in 1902, 50 in 1903, 100 in 1904, and 150 in 1905).[3]

1902 Touring car
1904 Runabout
Both images are of Union brand automobiles manufactured in Union City, Indiana.

Vehicle specifications

edit
From top: the chassis; the motor; and the transmission system

The operator of the Union automobile controlled the steering wheel with his right hand and the speed-changing lever, which allowed two speeds for forward movement and one for reversing, with his left. The variation in speed was permitted by the motor, which could be varied from 150 to over 1,500 revolutions per minute. The top speed of the automobile was 20 miles per hour (32 km/h).[6] The gasoline tank, which was hidden in the back of the seat, had a capacity sufficient to run the automobile for 125 miles (201 km) to 150 miles (240 km). The left foot controlled the handbrake; by throwing the transmission system into reverse, it operated as an emergency brake. This novel transmission system, which was connected by double chain to the rear wheels, was gearless, eliminating the jarring movements then associated with gear changes.[7][8]

The automobile's motor was devised by Lambert. Started by dry cell batteries, the four-cycle gasoline engine had two opposed cylinders that produced an initial eight horsepower. Both cylinders acted on one crankshaft, producing a balanced engine. After the engine was started, an electric magneto generator sparked the combustion of the gasoline in the cylinders to keep the motor in operation.[7] A gear from the camshaft drove a circulating pump which water-cooled the engine by means of a large radiator coil.[6]

The automobile, which had a 6-foot (1.8 m) wheelbase and a 56-inch (1,400 mm) axle track, was equipped with 34-inch (860 mm) wheels and 3.5-inch (89 mm) wide pneumatic tires and enameled sheet steel mud guards; kerosene oil lamps were additionally provided for evening travel.[6] In 1902 and 1903, a front seat was provided for two people, which could be closed up and the vehicle then used as a four person runabout vehicle. It cost $1,250 ($44,019 in 2023), with the option of a $25 dos-à-dos (rear-facing) seat which converted the car into a six-passenger vehicle.[3][7]

The final model produced by the Union Automobile Company was a 1905 Model E. Fitted with a detachable side entrance tonneau body, which sat three people, the car was upholstered to a high standard: genuine leather was used in combination with a soft insulation material and springs in both the seat cushions and the back.[9] It could hold up to five passengers, and was equipped with two oil lamps, a horn, and necessary maintenance tools, for a total price of $1200 ($40,693 in 2023) ($1125 without the tonneau).[9]

 
Union model E without tonneau
Union model E with a tonneau
Union model E delivery wagon
Union automobile Model E at different stages of style development.

See also

edit

Footnotes

edit
  1. ^ a b c "Union City History". Archived from the original on 2011-07-07. Retrieved 2008-12-19.
  2. ^ Dolmar, Hugh (1906). "The Lambert, 1906 Line of Automobiles". Automobile Trade Journal. 10. Chilton Company: 225a.
  3. ^ a b c Kimes 1996, p. 1487.
  4. ^ Georgano (V1) 2000, p. 853.
  5. ^ Georgano (V2) 2000, p. 1642.
  6. ^ a b c "The "Union" Automobile". The Horseless Age. 10. Horseless Age Company: 701. 1902.
  7. ^ a b c "The Union Convertible Runabout". Cycle and Automobile Trade Journal. 7. Chilton Company: 170. 1903.
  8. ^ "America's first car wreck doomed Ohio automaker". Palladium-Item. Richmond, Indiana. January 22, 1995. p. 22 – via Newspapers.com  .
  9. ^ a b "The Union Convertible Runabout". Cycle and Automobile Trade Journal. 9. Chilton Company: 126–129. 1905.

Sources

edit

Further reading

edit
  • Bailey, L. Scott, Historic Discovery: 1891 Lambert, New Claim for America's First Car, Antique Automobile magazine, Vol. 24, No. 5, Oct–Nov 1960
  • Biography of John W. Lambert, written by his son January 25, 1935 — obtained from the Detroit Public Library, National Automotive History Collection
  • Dittlinger, Esther et al., Anderson: A Pictorial History, G. Bradley Publishing, 1990, ISBN 0-943963-16-8
  • Dolnar, Hugh, Automobile Trade Journal, article: The Lambert, 1906 Line of Automobiles, Chilton Company, v.10 January 1906
  • Huffman, Wallace Spencer, Indiana's Place in Automobile History in Indiana History Bulletin, vol 44, no. 2, Feb. 1967; Indianapolis, Indiana Historical Bureau
  • Huhti, Thomas, The Great Indiana Touring Book: 20 Spectacular Auto Tours, Big Earth Publishing, 2002, ISBN 1-931599-09-2
  • James, Wanda, Driving from Japan, McFarland, 2005, ISBN 0-7864-1734-X
  • Madden, W. C., Haynes-Apperson and America's First Practical Automobile: A History, McFarland, 2003, ISBN 0-7864-1397-2
  • Scharchburg, Richard P., Carriages Without Horses: J. Frank Duryea and the Birth of the American Automobile Industry, SAE, 1993, ISBN 1-56091-380-0