The Lohr Railway System or Modalohr System (French: Système Modalohr) uses special railway wagons of a type known as piggyback wagons,[1] to carry standard road semi-trailers on the European rail network.[2] They are currently used on the AFF route from France to Italy and Luxembourg to the French border with Spain and vice versa. There are plans to expand this service. They have also been approved for the Channel Tunnel.[1] This articulated railway wagon consists of two low-floor decks, resting on a single Y25 jacobs bogie in the middle and on two Y33 bogies on the extreme ends. Using standard bogies resulted in lower maintenance costs compared with the similar rolling highway concept. The deck between the bogies (trucks) pivots (swings) 30°, allowing the trailers to be loaded from the sides. The cars are built by Lohr Industrie.[3]

Loaded Modalohr wagon
Modalohr wagon in loading position
Trailers per wagon 2
Max speed 100 km/h (62 mph)
Wagon unladen weight 34 t (33 long tons; 37 short tons)
Wagon loaded weight,
unladen weight plus vehicle weight
110 t (108 long tons; 121 short tons)
Wagon length
articulated car
34 m (111 ft 6+58 in)

See also

edit

References

edit
  1. ^ a b "Railway Gazette: Modalohr piggyback wagons approved for Channel Tunnel". Railway Gazette International. 2011-11-23. Retrieved 2011-11-23.
  2. ^ Lohr Railway System at lohr.fr. Retrieved 23 Jun 2017.
  3. ^ "System comparison: Competing concepts for combined cargo". June 2011.
edit

Comparable concepts

edit