Equidistant conic projection

The equidistant conic projection is a conic map projection commonly used for maps of small countries as well as for larger regions such as the continental United States that are elongated east-to-west.[1]

The world on an equidistant conic projection. 15° graticule, standard parallels of 20°N and 60°N.
The equidistant conic projection with Tissot's indicatrix of deformation. Standard parallels of 15°N and 45°N.

Also known as the simple conic projection, a rudimentary version was described during the 2nd century CE by the Greek astronomer and geographer Ptolemy in his work Geography.[2][3]

The projection has the useful property that distances along the meridians are proportionately correct, and distances are also correct along two standard parallels that the mapmaker has chosen. The two standard parallels are also free of distortion.

For maps of regions elongated east-to-west (such as the continental United States) the standard parallels are chosen to be about a sixth of the way inside the northern and southern limits of interest. This way distortion is minimized throughout the region of interest.

Transformation

edit

Coordinates from a spherical datum can be transformed to an equidistant conic projection with rectangular coordinates by using the following formulas,[4] where λ is the longitude, λ0 the reference longitude, φ the latitude, φ0 the reference latitude, and φ1 and φ2 the standard parallels:

 

where

 
 
 
 

Constants n, G, and ρ0 need only be determined once for the entire map. If one standard parallel is used (i.e. φ1 = φ2), the formula for n above is indeterminate, but then

 [5]

The reference point (λ0, φ0) with longitude λ0 and latitude φ0, transforms to the x,y origin at (0,0) in the rectangular coordinate system.[5]

The Y axis maps the central meridian λ0, with y increasing northwards, which is orthogonal to the X axis mapping the central parallel φ0, with x increasing eastwards.[5]

Other versions of these transformation formulae include parameters to offset the map coordinates so that all x,y values are positive, as well as a scaling parameter relating the radius of the sphere (Earth) to the units used on the map.[1]

The formulae used for ellipsoidal datums are more involved.[6]

See also

edit

References

edit
  1. ^ a b "Simple Equidistant Conic Map Projection". Simulator Manual. PowerWorld Corporation. Archived from the original on 22 May 2020. Retrieved 21 May 2020.
  2. ^ Snyder 1987, p. 111.
  3. ^ Snyder 1993, pp. 10–11.
  4. ^ Weisstein, Eric. "Conic Equidistant Projection". Wolfram MathWorld. Wolfram Research. Retrieved 20 May 2020.
  5. ^ a b c Snyder 1987, p. 113.
  6. ^ Snyder 1987, pp. 114–115.

Sources

edit
  • Snyder, John P. (1993). Flattening the Earth: 2000 Years of Map Projections. University of Chicago Press. ISBN 0226767469.
edit