The Canon TS-E 45 mm f/2.8 is a tilt-shift, normal prime lens that provides the equivalent of the corresponding view camera front movements on Canon EOS camera bodies. Unlike most other EF-mount lenses, it does not provide autofocus.

TS-E 45 mm f/2.8
MakerCanon
Technical data
TypeTilt-shift lens
Focal length45 mm
Crop factor1.0
Aperture (max/min)f/2.8 – f/22
Close focus distance0.4 m
Max. magnification0.16
Diaphragm blades8
Construction10 elements in 9 groups
Features
Short back focusNo No
Ultrasonic motorNo No
Lens-based stabilizationNo No
Macro capableNo No
Unique featuresPerspective control, Scheimpflug principle
ApplicationProduct, Architecture, Landscape, Portrait[1]
Physical
Max. length90.1 mm
Diameter81 mm
Weight645 g
Filter diameter72 mm
Accessories
Lens hoodEW-79BII
Angle of view
Horizontal44°
Vertical30°
Diagonal51°
History
IntroductionApril 1991
Discontinuation2017
Retail info
MSRP1100[2] USD

Overview

edit

The TS-E 45 mm f/2.8 provides three degrees of freedom, allowing ±8° tilt with respect to the image plane and ±11 mm shift with respect to the center of the image area;[3] the movements can be rotated ±90° about the lens axis, though not independently.

Shifting allows adjusting the position of the subject in the image area without moving the camera back; it is often used to avoid convergence of parallel lines, such as when photographing a tall building. Tilting the lens relies on the Scheimpflug principle to rotate the plane of focus away from parallel to the image plane; this can be used either to have all parts of an inclined subject sharply rendered, or to restrict sharpness to a small part of a scene. Tilting the lens results in a wedge-shaped depth of field that may be a better fit to some scenes than the depth of field between two parallel planes that results without tilt.

Unlike most view cameras, the shift mechanism allows shifts along only one axis, and the tilt mechanism allows tilts about only one axis; however, the rotation of the mechanisms allows the orientations of the axes to be changed, providing, in effect, combined tilt and swing, and combined rise/fall and lateral shift. The tilt and shift functions cannot be independently rotated. The lens is supplied with these functions at 90° to each other (e.g., providing tilt and lateral shift); they can be changed to work in the same directions (e.g., providing tilt and rise/fall) by removing four screws, rotating the front of the lens 90°, and reinstalling the screws.

See also

edit

References

edit
  1. ^ http://www.the-digital-picture.com/Reviews/Canon-TS-E-45mm-f-2.8-Tilt-Shift-Lens-Review.aspx Review from The Digital Picture
  2. ^ "Canon TS-E 45mm f/2.8 Reviews - PopPhoto". Archived from the original on 2008-05-28. Retrieved 2008-06-26.
  3. ^ Instructions: Canon Lens TS-E 24mm f/3.5L, TS-E 45mm f/2.8, TS-E 90mm f/2.8. Pub C-II-195E. Canon Inc. 1991. p. 55.
edit